WetFloat^®

Your wet table for ultra-pure fractions

or directly to dry separation

How does a wet separation table work?

After granulation or similar processing steps, mixed fractions, such as non-ferrous mixtures or aluminum-copper mixed fractions, are fed onto a separation deck of the WetFloat. A steady and continuous water supply creates a float on the deck causing light particles such as plastics to float while heavier particles such as metals descend to the bottom of the separation deck. Adjustable by the tilt of the table, the light-floating particles are conveyed towards the lower part of the WetFloat. Simultaneously, the vibrating separation deck transports the heavy particles in the opposite direction towards the upper end of the WetFloat. As a result the WetFloat produces two material-pure fractions.

The WetFloat^® is an extremely reliable, highly selective and easy to use wet table!

WetFloat^® - Your benefits at a glance

Density-based separation of multiple materials
Metal separation from wire mixture
Separate Copper and Aluminum into purest fractions
Metal Recovery from E-Scrap
Significant reduction in metal losses
Constant product quality
Dedusting not required
Adjustable tilt-angle for material-specific configuration
Low water consumption due to closed loop design

Technical data - overview of the different models

	WetFloat^® 2000 – 300	WetFloat^® 2500 – 600	WetFloat^® 3000 – 1000
Dimensions [mm/inch]	2,600 x 850 x 1,350 / 102 x 33 x 53	3,400 x 1,100 x 1,350 / 134 x 43 x 53	3,600 x 1,400 x 1,600 / 141 x 55 x 63
Dimensions Separation Deck [mm/inch]	2,000 x 300 / 78 x 12	2,500 x 600 / 98 x 24	3,000 x 1,000 / 118 x 39
Weight [kg/lbs]	320 / 705	750 / 1,650	1,200 / 2,650
Drive [kW/HP]	1,5 / 2	3 / 4	3 / 4
Throughput capacity [kg/h / lbs/h]	300 – 400 / 660 – 880	700 – 800 / 1540 – 1,760	1,200 – 1,300 / 2,640 – 2,860